Browsing Category: Information

AR-15 barrel: Version what?

Information, Products
You might have noticed when we discuss our AR-15 barrels we refer to them as version 1, 2, 3, etc. At the time of this writing we are on version 4. We did this because during testing we would find different diminishing returns to incorporate into our barrels, or discover changes we wanted to make. We tried different; barrel twists, contours, [...]

DMR LR-308 prototype

Information, Products
When we decided to begin work on a large frame AR pattern rifle we knew one of them would be a shorty 6.5mm Creedmoor. We have utilized 16.5″ 6.5 CM’s in our bolt action rifles dating back to 2010-2011 for use with our suppressors. 6mm Creedmoor was another obvious choice, we have migrated to that cartridge for competition use over [...]

Forty Five Sixty Rifle

Information, Products
The Forty Five Sixty is our PRS/NRL competition rifle and comes ready to mount a scope and zero! This offering will allow you to compete at the highest levels of practical long range precision shooting. At the heart of the Forty Five Sixty rifle is a custom 3-lug R700 footprint action, Bartlein 5R barrel and Trigger Tech Special trigger. We [...]

Dead Air Silencers: Nomad-L

Information, Products, Video
The Nomad-L or “El Nomad” as we like to call it is a new addition to the Dead Air Silencers line-up. The Nomad-L is a longer version of the Nomad-30 at 8.39″ versus 6.5″ and incorporates the same mounting options and accessories. The added length of the Nomad-L allows for additional baffles increasing the sound [...]

DMR AR-15 prototype

Information, Products, Video
We have always gotten a lot of question regarding AR platform rifles. We have a long time connection to large frame AR’s with our founder Dane Miller beginning his practical long range competition experience using a DPMS LR-308 Winchester. Although many would look down their nose at his rifle, they were often doing it while looking up at [...]

Trigger Tech R700 2-stage Prototype

Information, Products
I have been given the opportunity to try a 2-stage R700 trigger from Trigger Tech. The trigger is marked “2 STAGE PROTOTYPE” and features the flat/straight trigger. My current experience with 2-stage triggers have been with the Accuracy International, KRG Midas and Geissele Super R700. I am familiar with Trigger Tech single stage [...]

DMR: Available Chambers

Information
Below is a list of the chambers for cartridges we offer. We can also chamber barrels using client supplied tooling. Please email inquiries to dmillerrifles@gmail.com, or give us a call Monday through Friday 7 am to 3 pm at (702) 420-9188. .20 cal .204 Ruger .22 cal .223 Wylde .22-250 .25 cal 25 Creedmoor 6mm .243 Winchester 6mm Creedmoor SAAMI [...]

Terminus Helios

Building, Information, Products
Since switching to an Accuracy International rifle I have developed a serious appreciation for 60 degree bolt lift actions. The actions that come to mind are the Sako TRG and Accuracy International. In the past if you wanted a 60 degree bolt lift you had to commit to a non-Remington 700 footprint platform. When Curtis Custom came out with the [...]

Terminus Zeus & Curtis Custom Vector carbon fiber wrapped barrels

Information, Products
DMR carbon fiber wrapped barrels for the Zeus/Vector are made with the same quality and attention to detail as all DMR products and services. We start with a premium match grade carbon fiber wrapped barrel from Proof Research in Sendero contour and chamber it to our exacting standards. This combination produces highly accurate barrels for the [...]

Terminus Zeus & Curtis Custom Vector barrels

Information, Products
DMR barrels for the Terminus Zeus & Curtis Custom Vector are made with the same quality and attention to detail as all DMR products and services. We start with a premium match grade stainless steel Bartlein 5R barrel in medium Palma, or heavy Palma contour and chamber it to our exacting standards. This combination produces highly accurate [...]